SOHC.co.uk Forums > CB350/400
400 four knocking noise.
buxtonmick:
Steve, just a point; in the vid the initial revs are at 1400 rpm not 1200 :)
mick:
I would try a fresh plug in that pot that's running cold that will make a difference when all 4 pots are running together, cheers ;) Mick.
Lynx:
Thanks for pointing that out Mick :-[.
It's not the plugs. I swapped 2 plugs but the same cylinder was cold.
LesterPiglet:
No way was that bike revving at 1400. Something wrong with that tacho.
Bitsa (Ralph Wright - RIP):
Lynx
Sorry to state the obvious but until you get that cylinder running right you aint gonna get that knock to go.Shes dragging a dead piston.Can only be 2 things no compression or no fuel to it.
It really sounds like the carb to me.
Cheers
Bitsa
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version