SOHC.co.uk Forums > CB750

Gordons Frame Kit.

<< < (3/3)

mick:
Well i have been slowly getting bits done to my F1 over the last few weeks  ;), i've cleaned the pistons, barrels & head up,

renewed the gaskets and o rings etc, had the stripped spark plug thread helicoiled & had her running again with no issues so far  8),

i've had a tidier 4 into 1 hanging in the loft for the last 7 years or so, looks like a Marvin or Alpha ? so i have put that on & made rear hanging bracket & centre stand stop for it,

i've dropped the sump and screen and cleaned them out, treated her to a new spin on filter, i'm going to take the clutch out & inspect it whilst i have chance,

i had a bit of a setback with the front caliper binding, after stripping it down the culprit wasn't hard to find in the form of a rusty piston it gave me chance to refit the original caliper with the new bleed nipple repair kit fitted, i've had a few issues with it weeping at the copper washers on the banjo bolt sorted now just need to get the rest of the air out of the system feels very spongy at the mo,

got the rear caliper to strip clean & inspect & put back together, heres some photos of my progress  ;) cheers Mick.

Bryanj:
Glad the repair kit worked Ok mate, still got some left if people want one!

UK Pete:
Good stuff Mick, its good when you make progress like that
Pete

Navigation

[0] Message Index

[*] Previous page