SOHC.co.uk Forums > CB750

CB750 K7 question

(1/3) > >>

H2Eric:
I'm putting a K3 together, but using a few bits off other models to use up what I have lying around to save a few pence. The clutch lever I've just refurbished came from a K7 and has a switch with a couple of wires coming from it. What is that for?  Please don't tell me that the H&S zealots have included an indicator light to tell you that you have pulled the clutch in.


Thanks
Eric

PhilWall:
Hi.  It's a cut out switch to prevent you starting the bike in gear without the clutch pulled in.  If you go to cmsnl.com you can compare the part numbers for each bike and see which bits are common to both bikes.  Cheers. Phil

Bryanj:
Like Phil sez on the later bikes either the neutral light had to be on or the clutch lever pulled in, just remove it or leave it disconnected

H2Eric:
Thanks gentlemen. Seems the K3 has the same setup on the handlebar switch as the K7 judging by the parts fiche, though there maybe differences in the switches (different part numbers). Does the K3 have the lights on all the time like the K7 ?

Eric

Bryanj:
neither of them should if they are UK models, only the yanks had lights on all the time

Navigation

[0] Message Index

[#] Next page