SOHC.co.uk Forums > CB750

CB750 F1 Fuel Tap

<< < (2/2)

hairygit:
I found the tap, it could do with a filter kit (£16 from DSS) if you pm me your name/address I'll pop it in the post to you

Tomb:

--- Quote from: r1_pete on May 29, 2012, 08:11:46 AM ---Thanks All, does anyone know what the thread is, it looks like M20 x 1.5, but as usual I lent a mate my thread gauge, so can't be sure of the pitch.
Cheers.
Pete.

--- End quote ---

Sounds like you're sorted, buuuut if you're ever short of a thread gauge use a bolt you know the pitch of, i.e. a standard M10 has a pitch of 1.5mm, slide that up against the (suspected) M20 for a gauge.

Same with any other fine thread bolts you want to measure, use a smaller known thread bolt for a gauge.

e.g. Is it an M10 fine thread on your bike, what pitch?? 1.25mm, 1.0mm. Does a standard M8 fit into the thread nicely or a standard M6?  Standard M8 pitch is 1.25mm, M6 - 1.0mm.

HTH

Sorry, my engineer OCD kicking in, I'll get me coat  :-X

Navigation

[0] Message Index

[*] Previous page