SOHC.co.uk Forums > CB750

head stuck

(1/1)

Robbo:
my head is stuck to the barrels on my f2... I've undone all the bolts and the barrels have lifted from the engine. I am baffled (unless there are 4 more bolts under the 4 rubber pucks?)
tried knocking it with a rubber mallet, soaking it in wd40, going to attack it with wooden wedges tmw but am really struggling

Any help/advice welcomed

hairygit:
Yes, there ARE 4 more crosshead screws (unless they've been replaced with bolts by a previous owner) under the rubber plugs/pucks. So don't try wedges etc until you have got them ou, they are quite deeply recessed, so make sure you have a long screwdriver, and make sure it is the correct fit for the heads :D

Bryanj:
They have a 10mm hex with a screwdriver cross in the middle

Navigation

[0] Message Index