SOHC.co.uk Forums > CB750

k7, k8 quick question

(1/2) > >>

UKROBK7:
Questions:

K8 - Where does the breather tank oil drain run?  This is the bolt-up type catch pot with the u-bend drain hose.

K7 - Where does the points plate wiring run, is it along the frame or under the engine by the neutral switch wiring?  If its along the frame anyone know the clip part number (want to use the correct part, not tie wrap).

Rob

mick:
Can't help you with the breather pipe, but points wires are routed under the engine under the clutch housing and connect in a boot up near the brake light switch on the frame down tube , hope this helps cheers Mick.

UKROBK7:
Thanks Mick, the PO had tie wrapped the wiring along the frame and it looked a mess.  Now I know, I can get it to look tidy. 

Still need help with the K8 breather!

Rob

Bitsa (Ralph Wright - RIP):
Rob
Have a look on cmsl site you might be able to work it out from the pics to me probably not much help but it looks like the same set up for k7 and F1.
Sorry can not help you further as I am not familiar with these models.
All the best
Bitsa

Spitfire:
Don't know about the K8, but this is my F1 set up.

Here's the F2 version


Cheers

Den

Navigation

[0] Message Index

[#] Next page