SOHC.co.uk Forums > CB500/550

Calling carb experts . . .

<< < (2/2)

hairygit:
I've purchased parts from that particular e-bay seller, big bore kit, clutch and various other bits, and all have been relatively good quality, and as you'll find in other threads on here, we are not that keen on Keyster kits for various reasons. So yes, give cruzin image a go ;D

LesterPiglet:
Do jets and needles need to be replaced for any other reason than an exhaust, intake or porting job? Genuine question as I can't imagine any wear going on unless you have 100,000 miles on your clock.

Bryanj:
keep all the original jets except possibly the float needle and seat and replace all the "O" rings. Inspect the brass overflow tubes as they can crack

basketcase:
Hi St Peter, I`ve a set of these which I bought thinking that they`d fit my `77 K3, which I`ve been told they won`t. I advertised them on this site but had no takers, they`re still in the original packaging and sitting in my garage if you want them....and you don`t have to wait 2 weeks for delivery :D Message me if you`re interested.
Cheers, Nigel.

Navigation

[0] Message Index

[*] Previous page