SOHC.co.uk Forums > CB750

HM341's on a k1

<< < (6/6)

the-chauffeur:

Dunno if I'm the only one, but I'm beginning to wonder how many different shape side stands there were through the early K series. 

I have a similar issue to Green - when folded up, my K2 side stand sits just short of touching the 341's.  Although I've got a rubber stopper fitted, the stand is nowhere near touching it; it looks to be about half an inch or so short, and to confuse matters further, has an outward bend on it.  Consequently, it gives the bike a very strange lean angle (50-ish degrees), which has always struck me as kinda scary.

Am I right in thinking the K2 stands should essentially be straight - and tubular?

steff750:
@chauffeur  i would say that your sidestand is bent lol, it should be exactly like the one bitsa posted ,although they do wear a bit on the bolt hole, they should never be over as far as 50 degrees. take it off and bang it flat

Navigation

[0] Message Index

[*] Previous page