SOHC.co.uk Forums > CB500/550

CB500 K2 Cafe build.

<< < (4/7) > >>

K2-K6:
If that's the first time welding, then it doesn't appear too bad. I've seen some attrocious stuff and wonder how it stays together at all on some modified bikes.

It looks (can't see entirely as a bit out of focus) as though the weld penetration isn't too bad which is what you're after. don't be tempted to grind too much off for cosmetic purposes as it can result in significant reduction in material strength around the joins.

Another couple of steps forward at least.

Mitchv60:
Seats done. :)
I purchased a second hand Giullari seat although from pictures I wasn't 100% sure it was the look I was after,but once it was on the bike my doubts where dismissed.
The seat needed some modifying to get how I wanted it so I've stripped the cover and foam.The pan was a bit rusty and I've had to do a couple of repairs.I've also trimmed the back to fit the frame,made a lock bracket and a couple of extra brackets for the back to remove any movement while riding.
Back to work tomorrow so work will slow up to weekends only.

Mitchv60:
Seat pan,exhaust clamps and front mudguard have now been media blasted.
I wasn't sure the mudguard would be salvageable as it had a couple of small holes in,well this was the finished result :o


The fuel tank had a small rust hole in the side which was brazed but I then found another 4 pin holes in the underneeth at the front when I added the rust remover so they where repaired as well.
This was the product I used to seal the inside of the tank as most are only good up to 10% mixed ethanol petrol where this is was good to 100%.


The seat pan has been painted gloss black and I dropped it into the seat trimmers today for a new cover and foam.

Spent last weekend polishing the sprocket cover.


My new mudguard arrived so I've trimmed the sides and drilled mounting holes.This had the bar that links the front and rear(honda racing style)but I didn't think it would look right on a naked bike so I broke out the dremmel


So tomorrow I will drop the fuel tank,mudguard and bracket into the painters so he can get them done along withe the side pods he already has.

stuartni:
looking good  8)

Mitchv60:
 Well the schedule has gone out the window by about a month due to the sudden death of my mum 6 weeks ago and losing just over 2 weeks due to concrete burns to my eyes.That said I have made a little progress.

The forks have been stripped and the stanchions sent of for rechroming,should have them back in about 5 weeks(7 week lead time) .

The front and rear hubs and rear brake assembly have been stripped and all the big casting flaws have been sanded out before I had them media blasted.


I've had all the paint done.I've decided to go with silver as you can see instead of the original black.



The seat pan was sprayed.I then gave it to Hoods County Customs who made all new foam and a new covering.


The engine is at my mechanics being stripped so I can get the cases bead blasted and then sprayed.
So that's about it so far.

Navigation

[0] Message Index

[#] Next page

[*] Previous page