SOHC.co.uk Forums > CB750

Cylinder head exhaust stubs removal ?

(1/3) > >>

p@ul:
I'm ready to remove the engine form the frame of my F2 but need to remove the stubs from the cylinder head. i have a Haynes work shop manual that covers all sohc 750's that states " the stubs are retained by 2 cross head screws " with no mention of a mod to the F2. I cannot see any screws retaining the stubs and i'm at a loss how i can remove them without causing damage to the stubs or cylinder head. They look quite corroded so maybe stubborn to shift at best !!
What's my best course of action  ?

Thanks Paul.

UK Pete:
Hi F2's should have studs with nuts, do you have any pictures
Pete

p@ul:
Hi Pete, my F2 is the US version of yours if that helps.

Cheers Paul.

Bryanj:
ALL F2's should have two studs per cylinder, only the early K's had stubs and you did not have to remove those to get the engine out!

p@ul:
Ah right so you're telling me i don't need to remove the studs to remove the engine on my F2 then, that's good but its going to be mighty tight to pull the engine out then. I tried doing it on my own last night but just ended up giving up...... I'll get my son  to give me a hand i think.

Cheers Paul.

Navigation

[0] Message Index

[#] Next page