SOHC.co.uk Forums > CB500/550

help identifying loom

<< < (2/7) > >>

Mitchv60:
Right I think I'm with you,I've got a 550 loom and a 500 subharness.
This may answer a question why I couldn't get power to a lot of the bike.When you turned the key all 3 fuses where live but that was it none of the lights worked.
What I can't get my head around though is if I've got the right loom now and the right sub harness why is there no connections for the fuse block and diode?
This the loom that's on the bike

The sub harness with the crimped wires to the fuse block.

The new 500 harness


And yes I know the kitchen isn't the place for bike parts. ;D

Bryanj:
No you have a 500 loom and a 550 sub harness and without a mass of work ther is no way to get them to connect to each other mate. If you can get a 500 sub loom it should fit on the same steel bracket

Mitchv60:

--- Quote from: Bryanj on January 25, 2013, 06:53:27 AM ---No you have a 500 loom and a 550 sub harness and without a mass of work ther is no way to get them to connect to each other mate. If you can get a 500 sub loom it should fit on the same steel bracket

--- End quote ---

Why is the new 500 loom pictured 8 wires short compared to the original?

hairygit:
That'll probably be 6 for the 3 fused cicuits, and 2 for the clutch switch diode ???

Bryanj:
Why is the new 500 loom pictured 8 wires short compared to the original?


Because the original is also a 550 loom not a 500

Navigation

[0] Message Index

[#] Next page

[*] Previous page