SOHC.co.uk Forums > CB350/400

yoshimura 460 head gasket

<< < (2/2)

Dan:
For anyone that is interested, there is a NOS Yoshi piston kit on eBay atm. 54mm pistons, head gasket etc. £599.

taminator:

--- Quote from: ka-ja on March 15, 2013, 12:30:13 PM ---Hi,
     I had the same answer from them-non commital, but would say suzuki recommend its correct sized/rated suzuki o-ring to fit a Honda-no. All I can say is that the dimensions and thickness are OK, and If it does not work for you, I will donate my home made solid copper gasket (5,000 miles and no trouble) to your cause, as I am rebuilding with the one from Japan.
     PS I have been told their piston rings also will fit with a little end clearance adjustment, and the 466cc kit will come in handy if the yoshi piston/ bores wear

--- End quote ---
  hi ken, very nice of you to offer , I will order one and see how it works, who would you recommend for rebore work, thanks tommy.

taminator:
Yes  I seen that kit , need a wee lottery win for that.

ka-ja:
Hi Tommy,
                 Cannot help with a recommend for a rebore as I did my own machining before I retired, I could give some addresses but do not know how good, best of luck with your search-----------Ken

Navigation

[0] Message Index

[*] Previous page