SOHC.co.uk Forums > CB350/400

brake master cylinder circlip removal

(1/1)

59viperman:
 >:( can someone please tell me how to remove the circlip from the front brake master cylinder, I have bought a rebuild kit because mine is leaking [ like the petrol tank] . I have removed the ring below the rubber boot but I cant shift the circlip. I am using circlip pliers but its a three handed job trying to keep the piston down while I get at it. any tips before I throw it in the bin and buy a new one ?

Bryanj:
Reseverence and the correct bent pliers mate. I always use a plumbers type blowtorch to warm up down the hole and remove rust then if you push the piston in as far as possible a lot of the time it sticks down

tom400f:
See posts here: http://www.sohc.co.uk/index.php?topic=4812.msg22283#msg22283

59viperman:
 ;D thanks chaps will try everything,

59viperman:
 ;D eureka, job done. ha ha  8)

Navigation

[0] Message Index