SOHC.co.uk Forums > CB350/400

Neutral switch connection

(1/2) > >>

Seamus:
Silly question but how does the wire attach to the switch?
Received a 400/4 in parts to assemble and I did not take it apart. Wondering if something is missing.
Thanks in advance

hairygit:
There should be a little tiny (easily lost! >:() bolt in the top of it, and the single wire has an eye terminal on it, which is held by the bolt

Seamus:
Thanks mate. Appreciate the quick reply. Is the bolt a phillips type head screw?

PS do you still want the barrels?

steven400/4:
mine has a spring witch you push down then put your wire in the hole let spring go and it holds it in place

Seamus:
Thanks Steven, I will have a closer loook tomorrow and see which type I have. (Guess there are two). The wire to mine does not have a loop to fit a screw, so possibly the same as yours. (I hope so as I dont have the screw)

Navigation

[0] Message Index

[#] Next page