SOHC.co.uk Forums > CB350/400
400four choke
yorky10:
can any one tell me where I can get a good exploded picture of fourhundred 4 carbs.please.my book picture,haynes and the American one are oiled up .sad is not.if its not running after this its for sale.yorky.
mickwinf:
Try the CMSL site as they have exploded diagrams of everything. I have been where you are, frustrated with a bike that won't play ball, but keep trying and with help from this forum you will get there! Is there any members nearby who could take a look, two heads are better than one! Also everything else has to be spot on, valve/ignition plugs etc. Good luck!! Mick
sweetpeauk:
http://images.cmsnl.com/img/partslists/honda-cb400f2-england-engine-group-1j-1k-2j-2k_bigma000081e01-4_3e89.gif
Dan:
Only running when on choke definitely sounds like blocked jets. I also had carb issues (bike wouldn't rev past 6000). I know this will be frowned upon by some people but as well as using carb cleaner I ran a thin wire through the emulsion tubes with them out the carbs - down the length of them and through the holes drilled across them. If you use a soft wire, copper for example, rather than something coarse like untwisted brake cable there shouldn't be a problem. It worked for me...
mickwinf:
Did you remove the emulsion tubes to clean them?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version