SOHC.co.uk Forums > CB750

Running rich

<< < (3/6) > >>

Bitsa (Ralph Wright - RIP):
Adrian.
I am all for new ways for dealing with various measurements but easy for me I have a Honda device but I do remember someone made a float height tool out of a floppydisc and if I recall I thought that was bloody good idea if you have some old discs.Like me I do not like spending money for no results so you have my vote.Needle heights in my opion do not change over night you get my drift?
Best of luck
Bitsa

Waggles:
Annuver little tip with any stuck screws / bolts, use heat. I use a blowlamp, have seen people use welding torch but I don't recommend that as its too easy to damage the part(s) if you don't know what you are doing.

+1 with Bitsa on using a T- handle driver ( or similar )

Seamus:
Float height tool

Bitsa (Ralph Wright - RIP):
Seamus that the one I remember seeing
Cheers
Bitsa

adrian58:
BRILLIANT  ! ! thanks :)

Navigation

[0] Message Index

[#] Next page

[*] Previous page