SOHC.co.uk Forums > CB500/550
rewire - what size/spec of wire
ka-ja:
Hi Ewan
Snap with the wheels three weeks ago, only mine was the rear roadrider tyre, irritating when you are on your hands and knees fitting the axle pin to see an arrow 6 inches from your eyes pointing the wrong way-ooops.
As to my wiring ideas, I started doing individual circuit drawings because of the miniature ones in manuals, it is easier to know the exact circuit before you wire it!-----------------------------Ken
Ewan 500 K1:
splashed out £15 for a decent diagram from Kojacat (Laminated A3 ).... doesnt quite match my bastardised 500/550 old loom , but should be handy enough and deffo loads better than clymer / haynes / honda worksop manual versions.
http://kojaycat.co.uk/epages/950000457.sf/en_GB/?ObjectPath=/Shops/950000457/Categories/Motorcycle_Wiring_Diagrams
There's also this one, that maybe you've seen . You click on the wee table at the bottom and it switches different subcircuits on and off;
http://oldmanhonda.com/MC/wiring500.html . Still think the Kajacat one is the best though.
Just need to see how many more diversionary tactics I can think off before I actualy start on the loom . Wire, sleeving, block connectors and battery arrived yesterday.
Ewan 500 K1:
Started building the new wiring loom and relocatiing the electrics today ... going do okay so far...fingers crossed (will put some photos on my build thread soon) ... just two issues:
a) I've ordered the wrong block connectors ..anyone know of a supplier of 6mm blade hitachi connectors that are direct replacement for the OEM ones. Dont really want to have to replace all the ones on the end of the components , just the loom side. I've tried all of Vehicle Wiring Products, SG Motorssport, Kojaycat and Auto - electric supplies, but none have the correct ones
b) There's several places in the wiring where 3 or 4 wires all need connecting togeather at the same point. Eg indicator switch, front indicator, winker idiot light, rear indicator feed all connect via one of these connectors in the headlamp shell. On the original there are 4 point female bullet sockets .. ie allows four wires to be connected to one other wire at the same point , again anyone know of suppliers for these, cant find then anywhere either
Bryanj:
There is no know supplier of direct replacement block connectors mate, there is a firm in the US that does the 4 way connectors but I am on holiday with limited internet till the 18th so I cant link you to it till them sorry
Bryanj:
Found it!!
Go to www.vintageconnections.com looks like they now do some block connectors as well!!
If you make up an order let me know and I will add to it and share the postage as that can be a killer mate
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version