SOHC.co.uk Forums > CB350/400

Oil filter cover on '78 400/4

<< < (2/2)

ashewan:
Tom,
Its an easy out!
Andrew

Bryanj:
If you don't have the kit to weld a nut on you will have to cur off the remaining flange and proably sacrifice the filter housing but all the fours are the same so a used one should not be hard to find, New bolt from dave Silver nad make sure the spring and steel washer still exist inside

PatM:
Honestly, get someone with a mig set to weld a nut on- it will come off, then you can repent at leisure and fit a new bolt..

Navigation

[0] Message Index

[*] Previous page