SOHC.co.uk Forums > CB750

Drive chain sprocket

(1/1)

neat street:
Hi All
Just started to do an engine strip, it will be slow coz I have other jobs on the go. I have taken a look at the front drive sprocket, and this seems loose but there is no adjustment. should this be a tight fit with no movement? (side to side movement approximately 4mm)
Many thanks for your input.
John

mick:
Hi john a bit of play is acceptable I think, not sure about 4mm, could be due to pattern sprocket ?, cheers  ;) Mick

steff750:
 ;) yes same as mick says  no worries a bit of side play is ok just make sure the two securing bolts and locking washer are nipped up tight, even then the sprocket will feel a bit loose  ::)

neat street:
Hi Mick and Steff, thank for your help. I will probably need more advise soon?
Many thanks
John

mick:
No worries John ask away  ;) cheers Mick.

Navigation

[0] Message Index