SOHC.co.uk Forums > CB750

Would like a longer side stand

(1/2) > >>

Warthog1959:
Hi,
Does anyone know of a compatible side stand that is a couple of inches or so longer than stock. I have quite a Lean on my F2 and now I have fitted shocks that are 1" or so longer the lean is even more. Any other solutions appreciated.
Simon

LesterPiglet:
Check the forks on the sidestand are not bent. Check the hole that the bolt goes through is not enlarged and finally check your sidestand isn't bent.  :)

Warthog1959:
Well there is some back and forward movement of the side stand even when the bolt is fully tightened. But not enough to require another 2" in length. This side stand is stubby to say the least.

No sign of any other bending.

What is the solution when the hole has enlarged? this frame has recently been powder coated.

LesterPiglet:
I would think drill it larger and put a sleeve in.

Green1:
You don't need much play in the stand to get massive lean angles The bolt hole on my dads trophy is less than a thou over size and you have to place a two inch block under it to raise the bike to were it should be.Don't forget to check the condition of the bolt they can where quite a bit.

Navigation

[0] Message Index

[#] Next page