SOHC.co.uk Forums > CB500/550

K3 mixture with motad

<< < (2/3) > >>

paul G:
Thanks for the info.
Where is the measurement taken from I am guessing it is the far edge away from the valve !

Regards,

Piki:
Check what model the carbs are fit on your bike!!! I bought one 550 K3 with 550 Four Carbs!!! is very common it!!! 069 A Model-550 Four, PD46A-550K3!!!

LesterPiglet:
My F2 has a Motad, no re-jetting. I don't have PD carbs though, if that makes a difference. I know PD's were leaned out to meet US emissions.

paul G:
Hi,
        I have PD carbs. Does anyone know the jet sizes and needle settings for a 77 K3 .
I have the manual but this does not give them for a K3
Is the float height 14.4 for these carbs.
Thanks

mickwinf:
Hi Paul 550 k3 settings are (from Honda k3 supplement) main jet 90, air jet 130, slow jet 38, slow air jet 150, jet needle 3rd groove, float height 14.5mm. If you let me have your email address I can send a copy, it has all the info on differences of k3 model, regards Mick

Navigation

[0] Message Index

[#] Next page

[*] Previous page