SOHC.co.uk Forums > CB500/550

K31977 starter motor

<< < (2/2)

Bryanj:
To rebuild the starter clutch you need the bottom crankcase off and primary shaft out, all the 500/550 parts are the same.

the 500/550 are normaly very reliable on the starter clutch unless stood with grubby, sludgy oil for a very long time. If rebuild is necessary you need 3 off each roller, springs and spring caps

mickwinf:
 http://forums.sohc4.net/index.php?topic=122084.0#lastPost   this guy says you can do this job without taking engine out, worth checking out.
http://forums.sohc4.net/index.php?topic=122084.0#lastPost

paul G:
Mick,

Thanks for the effort and help, that is exactly how it sounds.
Will give it a go when I get the parts.

Regards,

paul G:
Mickwinf,

That link is brilliant, did it today.
Starter cluch repaired without breaking the engine, the link is spot on and easy to follow.
Thanks for your help.

mickwinf:
That's good news, saves a big strip down!

Navigation

[0] Message Index

[*] Previous page