SOHC.co.uk Forums > CB750

three yellow wires ???

(1/3) > >>

billy192:
just stripped the generator cover and found the wires look as though the have been v hot or even melted.





my question ?
which yellow  (i have four from the plug) goes to which wire? as they just came apart in my hands.






5 wires ? 2 on the inside coil (one yello one Green) and 3 on the outside coil all yellow i think.





confused
billy

neat street:
Hi Billy
See link, hope this helps, copy and past in window to view.

http://www.google.co.uk/imgres?imgurl=http://www.oregonmotorcycleparts.com/Diagrams/CB750k2.jpg&imgrefurl=http://www.oregonmotorcycleparts.com/diagrams.html&h=857&w=1296&sz=155&tbnid=MSaDkvQ3mybcpM:&tbnh=118&tbnw=178&zoom=1&usg=__3DkQViaYYRBlznoWuLg4V-r1yUk=&docid=8heHZwMdDwh4ZM&sa=X&ei=3P1aUr6XGoGJ0AXprYHoDQ&ved=0CC8Q9QEwAA

Best regards

John

cb750stu:
Hi billy I asked the same question a wee while back you've got 3 yellow wires and one white it probably looks yellowish it doesn't matter which yellow goes to which the white wire is the female connector pictured,

Cheers

Stuart

Bryanj:
The inner coil has a green wire(earth) a white wire(from the regulator)
The outer coil has 3 x Yellow wires (to the rectifier--conect anyway round)

It is not uncommon to find the connector block like that, it happens when a small amount of corrosion causes a high resistance contact which makes heat.

thats why we used to pull apart and clean the contactcs if we took the cover off

billy192:
thanks Stu/Bry
you little font of knowledge you  ;)
an see now in my own pic number one the top wire is indeed white, just with 55 year old eyes it looked yellow tar guys
is it Ok to solder the joints and cover with heat shrink?
Billy

Navigation

[0] Message Index

[#] Next page