SOHC.co.uk Forums > CB750

engine rig

(1/2) > >>

billy192:
Ok  I have made my engine rig, I just need to wire the starter and coils.
am I correct in thinking i need the following wires (I don't want the whole loom)
a switched Live to the Black/white on the coils as my ignition switch ( the coils wired to the points as normal)
a switched earth to the solenoid red / yellow

will this give the minimum to start and run the engine?
Billy

Bryanj:
Yes if the other small solenoid wire is switched live

billy192:
Thanks BryanJ

so on the solenoid, earth one wire and switch the other to live?
Thanks
Billy

Bryanj:
Yup, on the solenoid there are two small wires, one has to go to negative and one to positive with a switch in one of them or the starter will be engaged all the time

billy192:
Thanks Bryan

Navigation

[0] Message Index

[#] Next page