SOHC.co.uk Forums > CB350/400

Am I able to change the mileage...

(1/2) > >>

Sharpy:
Not in a fraudulent way but the clocks I have used to replace the ones that were original show a much higher mileage, the originals were totaled from 30 years in a garage and the replacements are out by about 20k... Now, I have no intention of selling the bike but feel that it should reflect the true mileage and not the miles that show from another bike....

For reference, if I did sell the bike then I would include all the pics from the resto which include the photo of the clocks showing about 700 miles.

Cheers

A not dodgy (honestly)

Sharpy

PatM:
The clocks are best taken to Peter who's a member of Vjmcc in Kent. He does a fabulous job of returning them for about 100 per clock.
If you want to have a go for yourself- the stainless band needs prizing open to allow the backs section of the clock loose. It's doable, but it will leave marks. Someone on her will have Peters email add. I've spoken to him at theGamecock, which is near BrandsHatch and I've seen his work.

PatM:
His name is Peter Horton and Ive got a pdf of how to do it that he kindly gave me- im going to try and upload it to this forum...Sod it- its too big! email me at patrickjmorgan@btinternet.com and Ill send it to you!

Clem2112:


Yes, take them to a specialist !
A very fiddly and tedious job.... Did speedo and tacho a while ago.

Got tendonitis from re-crimping the bands too !.... Have to say though, there are no marks visible from the top but on the underside the tell tale signs are there.

Wish I had re coloured the red line on the face
 while the tacho was apart though !

Bitsa (Ralph Wright - RIP):
If they are as easy as the 750 its open them up take the litttle circlip off seperate the dials and set them to what you want then close them all together and refit circlip job done.
Fidallly but not rocket science.I have only done this since total rebuild to motor so to monitor the milage since the first start after rebuild.
Cheers
Bitsa

Navigation

[0] Message Index

[#] Next page

Go to full version