SOHC.co.uk Forums > CB650

posable disaster with my 650

<< < (3/7) > >>

RickyC83:
Ok thanks

RickyC83:
The chain is fine now. I think when it was fired they never loosened the locking nut. Or set the rocker clearance. I'm starting to think the engine was rebuilt as a project with the thought it wuld never run again lol. It was supposedly sat in a bike club house. The may be no pistons on it lol.

RickyC83:
My mate wanted to try putting some easy start down the carbs. It blow a flame out the exhaust but no bang just a woosh sound. Timing?

fisjon:

--- Quote from: RickyC83 on November 26, 2013, 08:21:45 PM ---My mate wanted to try putting some easy start down the carbs. It blow a flame out the exhaust but no bang just a woosh sound. Timing?

--- End quote ---
YIKES! I would pull it apart and rebuild yourself or you might end up with a pile of nuts and bolts on the drive............. :o

RickyC83:
So I pressure tested the cylinders I have less the 10psi fro each. DEFO valves right?

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version