SOHC.co.uk Forums > CB750

Steering limit lug

(1/2) > >>

Lobo:
Morn all,

One of the steering limit lugs is slightly bent - in a past life the bike (750K2) must have had a fall. Problem is, the yolk just touches the tank at left lock. Until now I've bodged it with a slip-on heater hose 'washer'  (which slips over the lug) - but time now to fix ... assuming relatively easy. Hmm...

Suggestions please?

steff750:
 yes I have had the same problem .I built mine up with a bit of weld and that's probably the limit of my welding skills as I tend to blow holes in most stuff  8)

RGP750:
How about drilling and tapping and putting a mushroom head screw in,shouldn't show too much.
 :D. You could increase with washers under in needed.

Lobo:
An idea worth considering RGP.... not much material to drill into given a 'stout' mushroom would be needed, but will have an investigative look...

Aye Steff, your welding sounds like my painting, can never see why I shouldn't put 5 coats on at once and save time. Missus goes mad, everything (inc adjacent walls, carpets, curtains etc) about the house used to be a stipple finish - but hey, big result, she does the decorating now. Yahoo!

Seamus:
Looks like a quick weld would be the best solution, Arc or mig to build up quickly and grind down to the correct thickness. As you say, not much to tap into.

Navigation

[0] Message Index

[#] Next page