SOHC.co.uk Forums > CB500/550

Carb bowl o ring

(1/2) > >>

bomber:
Thanks to trigger6969 I'm about to get my self set of o rings
http://www.ebay.co.uk/itm/CB-550-K-Four-1977-FLOAT-CHAMBER-GASKET-SET-OF-4-/141078961668?pt=UK_Motorcycle_Parts_13&hash=item20d8f61e04

Now, does any one know if they will fit in my 069A carbs?
I have 550F 1976 and the o rings are described as to fit K carbs.

Bryanj:
THEY WON'T FIT you need the 500 or up to 76 k

bomber:

--- Quote from: Bryanj on January 07, 2014, 07:18:26 AM ---THEY WON'T FIT you need the 500 or up to 76 k

--- End quote ---

Thank you,
I will go the route of taping orings and puling tape out once the bowl is in place, did it once before.
Tricky way of doing it but the bit I'm not looking forward to is... fitting carbs back, it is such a pain.
Can't imagine having modern bike with all the bits of plastic in the way of carbs!

Norniron:
Ebayhttp://www.ebay.co.uk/itm/CB500-CB550-four-4-revision-O-ring-sets-for-all-4-carbs-Viton-rubber-/111236662648?pt=Motorcycles_Parts_Accessories&hash=item19e638c578

Trigger:
That is a lot of money for some o'ring's. I have always got my o'rings from old hardware shops or pluming supplier. Not B&Qs. 

Navigation

[0] Message Index

[#] Next page