SOHC.co.uk Forums > CB500/550

Loom and part i have labelled but ink faded

(1/10) > >>

MIKE550/4:
Looking at the loom I have,what do you think about this anything to worry about ?

should I just insulate over it? or suggest a better idea

also I have this part and ink has faded,

mickwinf:
Part on seat is the headlamp bulb connector, probably best to replace bare wire to be sure.

hairygit:
The first pic of the 3 wires to a plug is what fits onto the back of the headlight reflector, to either the bulb or sealed beam depending which is fitted. The chafing on the main look, cover with black insulating tape, should stop any more chafing and make it look tidier  ;D

MIKE550/4:
More info.... I hate wiring, split the loom as suggested and wire is green, bare for about 3-4 inches, no sign of burning and other wires looks unaffected, getting dark and poor lighting were the bike is

so to replace that section please go into detail  ;D

another pic

Trigger:
The green wire should be a earth wire. Looks like it has been rubbing against the frame.

Navigation

[0] Message Index

[#] Next page