SOHC.co.uk Forums > CB750

Exhaust and Centre Stand Removal

<< < (2/3) > >>

ShaunJ:
Many thanks for the offer of  help. Unfortunately I have no means of moving the bike at the moment. I know someone at a local engineering company who has access to welding equipment so I will make contact and see what they say.

Shaun

neat street:
Hi Shaun
My centre stand was a nightmare, I had to cut though the centre fixing to get it off, then nothing would get the fixing out the stand (even oxy heat would not budge it) but when it painted properly, it will be much better and harder wearing. I would suggest trying a bit of heat and try to remove if poss, if not, then paint it on.
John

whiteylfc:
re.exhaust stud .....I had one shear off when I had a cb750 engine in bits.tried the stud extractor method....useless....that snapped off and the guy at an engineering firm couldn't drill it out because the extractor was too hard.i was recommended having it 'spark eroded' at a nearby company(Derbyshire).they made a superb job..the original threads were left undamaged and they only charged me 20 quid....well happy....

mickwinf:
Oddjobs method worked for me!

mick:
yep same here done the same as oddjob on swinging arm bushes  ;)

Navigation

[0] Message Index

[#] Next page

[*] Previous page