SOHC.co.uk Forums > CB750

In trouble

<< < (2/3) > >>

mickharrow:
i have a spare top and bottom yoke set you are welcome to try and see if its any good

GeorgeW:
Thank you for the tip Bryanj.
Checked my K3 - both D washers missing. I've slackened the bolts, fortunately no cracks in my case.
Do you happen to know how thick the washer is? The gap with the bolt slackened is 2.5mm. I'll fit something until I'm next ordering parts. My those washers are expensive though, £5.94 each!
Regards

Bitsa (Ralph Wright - RIP):
Cheaper than a rhino top yoke I think.Your choice you are messing with a bike thats worth a small fortune and you can not afford a tenner!!!!!!
Come on
Cheers
Bitsa

hondaking:
I have checked to see if the D washers are fitted and yes there in place. This bike was restored by me 14 years ago and have only just noticed this crack. It looks fresh.

Bitsa (Ralph Wright - RIP):
Got to either be age or been wolloped.I have heard off people getting them welded but not tried it as yet.
Cheers
Bitsa

Navigation

[0] Message Index

[#] Next page

[*] Previous page