SOHC.co.uk Forums > CB750

CB750 K7 Dual disc conversion.

(1/2) > >>

MarkCR750:
Hi, I'm building a replica CR750, one of my next tasks is to do the dual front disc conversion, I have found a few old threads but has anyone done this recently?,  any pitfalls I should look out for?, I have a second disc/calliper/mount and am using a Fireblade 919 master cylinder,any tips/photo's would be appreciated, cheers Mark.

Ewan 500 K1:
my experince on pages 5,6,8 & 9 of 500/4 my build thread Mark, cunno if its muh help .. but goes through my pains and agony ;)

http://www.sohc.co.uk/index.php/topic,4120.0.html

MarkCR750:
Cheers Ewan, no pain no gain!

gamma:
I did this some time ago and still not finished the bike but I made a spacer to put the discs at the same distance from each fork leg, and am going to use a KOSO tacho so got rid of the cable drive and fitted a spacer see http://forums.sohc4.net/index.php?topic=74974.msg835181#msg835181

MarkCR750:
Thanks Gamma, I am getting rid of the speedo drive as well so it makes sense to use a spacer as you have done instead of using lots of spacers on the calliper mount, cheers for the photos too, looks great.

Navigation

[0] Message Index

[#] Next page