SOHC.co.uk Forums > CB750

750 k6 exhaust/ foot rest bolts

<< < (2/4) > >>

billy192:
I have the correct measurements just need to look around. 17mm AF head x 7mm deep,14mm dia shaft with step down to a m12 thread 14mm long total length 149mm.
Billy

billy192:
was given this by a message from a guy on this forum.  :-\

the exhausts have a pipe like bracket on each pipe that is about 20=25 mm long then through the footrest bracket which is about 40-60 mm + nut washer and footrest bracket. 149 seems long but it has to go through a fair bit of steel work.

next week (as i work away all week) i will mock up the exhausts and see what I actually make the min length to be. ;D
Billy

have a look at these http://www.ebay.co.uk/itm/Honda-NOS-CB750-Exhaust-Foot-Peg-Bolts-CB-750-CB750K-90146-300-020-/331119099840?_trksid=p2047675.l2557&_trkparms=aid%3D111000%26algo%3DREC.RVI%26ao%3D1%26asc%3D20494%26meid%3D4881349892287807419%26pid%3D100033%26prg%3D9150%26rk%3D0%26rkt%3D4%26sd%3D231049657526&nma=true&si=HTOhm27F03bfunQKckP%252BZisrXUI%253D&orig_cvip=true&rt=nc

Bitsa (Ralph Wright - RIP):
Billy
As its still pissing down I will undo 1 of mine and post the measurements.I know they are not cheap but as I always say buy honda, fitting no PROBLEM
Cheers
Bitsa

billy192:
bitsa your soooo good

Bitsa (Ralph Wright - RIP):
Billy,
Is this of help to you?
146mm long
12mm across
and as I have no calipers I ran a piece of wire around it and the circumference is 52mm round
Bolt head 17mm
Nut 19mm spanner size
Cheers
Bitsa

Navigation

[0] Message Index

[#] Next page

[*] Previous page