SOHC.co.uk Forums > CB750

CB750 Frame numbers, I'm getting confused!

<< < (2/2)

hairygit:
I'd have to agree it's a bitsa, those are K7 tank and carbs

Sent from my GT-S5839i using Tapatalk 2

MarkCR750:
I'll give David Silver's a call tomorrow, they are selling K6 stanchions, I'll ask if they can give me the measurements of their stanchions, they are usually very helpful, failing that I'll just have to get the ones I've got straightened and re-chromed, a lot of messing about though compared to just replacing, thanks all for your help.

JamesH:
Mark have you thought about a gl1000 front end for the project? 38mm stanchions and more or less a bolt on conversion. You could also use the did flanged front rim from the gl1000. Just a thought...

JamesH:


Mikeb4 on the us forum used the gl1000 front end for his cr style road bikes...not too shabby.

MarkCR750:

--- Quote from: Jamesh_sussex on February 16, 2014, 04:59:15 PM ---Mark have you thought about a gl1000 front end for the project? 38mm stanchions and more or less a bolt on conversion. You could also use the did flanged front rim from the gl1000. Just a thought...

--- End quote ---
Yes I had considered it , dynamically it's probably the better option,  but I wanted as much of the original CR750 look as possible (within severe budgetary constraints! :)) so wanted the callipers in front of the forks etc, (that's in no way a criticism of the bike pictured which looks great).

Navigation

[0] Message Index

[*] Previous page