SOHC.co.uk Forums > CB500/550

fork drain screw bolt sheared

(1/14) > >>

MikeM:
how would i go about sorting this, sheared off and bolt is just below being flush ( 1mm ish under being level )

not a big bolt length wise 10mm, I would say 8-9mm in the fork, need some advice to  fix

AshimotoK0:
Spark Erosion if you can't drill out.

Cheers ... AshD

LesterPiglet:
It will drill out with a small enough bit.

ka-ja:
Hi,
   whatever you do strip the unit first, wouldn't be the first time I have had a broken screw turn itself right in when being drilled, the heat from drilling coupled with the turning action of the drillbit---ken

MikeM:
strip down the fork do you mean, ie get the seals out

does that mean I have to take off virtually front of bike to fix this ?

Navigation

[0] Message Index

[#] Next page