SOHC.co.uk Forums > CB500/550

Found my "points" problem.

<< < (2/3) > >>

JamesH:
Yeah it's a bit of a pain John. Not ideal, but guess you're aware of the ngk splicers? http://www.ngksparkplugs.com/products/performance/splicers.asp?mode=nml

Johnwebley:

--- Quote from: Jamesh_sussex on March 16, 2014, 12:02:16 PM ---Yeah it's a bit of a pain John. Not ideal, but guess you're aware of the ngk splicers? http://www.ngksparkplugs.com/products/performance/splicers.asp?mode=nml

--- End quote ---


 thanks,
 but I would prefer to fit into the coils,not just join to old cable,

 I have done joins using thin woodscrews and sleeving,its working so far !!

JamesH:
In my experience you've got very little chance of successfully opening the 'moulded' body of the coil and successfully re-sealing it afterwards. Also, it's normally the 'cut end' of the ht lead that starts to degrade - I've found that when you cut and splice close to the body of the coil the original ht lead is 99% of the time in excellent condition. The ngk splices are excellent quality. Just my view, James.

LesterPiglet:
My homemade splices are still fine after 30 odd years. There is no movement of the leads up near the coils so I'm not expecting any problems.
I used silicone leads that are very flexible.

JamesH:


--- Quote from: LesterPiglet on March 16, 2014, 04:41:11 PM ---My homemade splices are still fine after 30 odd years. There is no movement of the leads up near the coils so I'm not expecting any problems.
I used silicone leads that are very flexible.

--- End quote ---
yep fair point...

Navigation

[0] Message Index

[#] Next page

[*] Previous page