SOHC.co.uk Forums > CB650

Cylinder Head Bolts

(1/4) > >>

Paull:
Hi All,

Been sometime since I have been here, been building a new monstrosity ;) ;) ;) ;).

Where can i get a new set of cylinder head bolts for a 1979 CB650z.

 Paul

Bitsa (Ralph Wright - RIP):
Paull,
Dare I ask why?You are a bit vague lost them stripped etc
Cheers
Bitsa

Trigger:
Bitsa, he is most probably going by the book. The manual states that you should change the head bolts if disturbed. Disturbing is the price of them. 

Bitsa (Ralph Wright - RIP):
Thanks Trig but thats the first I have ever heard off, is it still the 1st of april?I have always said in the past even at my old git age you still can learn.Is that true by the manual?To me as you suggest what a rip off.
Cheers
Bitsa

Paull:
Hi Chaps,

The poor ol girl has had a rough life.

Left in the wet, rebuilt at one time by an animal with no clue.

As an example, the oil gallery plug was put in the wrong way round and a bolt cut off and blue tacked in the hole to push it in.
They used some sort of fencing bolt to bolt the crank case together and snapped a bolt off.

I snapped 4 off getting them out, they were so tight.

I could make studs for it, I have the steel.

But just wanted to know the price of bolts and where to get them.

Thanks for any help

Paul

Navigation

[0] Message Index

[#] Next page