SOHC.co.uk Forums > CB350/400

rear wheel hub/spokes

(1/2) > >>

kenny1059:
Could somebody please tell me if the rear hub on a 400f,is in the centre of the wheel,or is it offset?
I got new chrome rims and stainless spokes from CWC, on Friday. Gone to fit them together today,and realised ALL the spokes they have sent me have a right-angle bend on them. :( :(  Correct me if I'm wrong,but this doesn't matter for the front wheel,does it??
For the back wheel,the inner spokes have a 45deg, bend and the outers have a 90deg. I checked this as I took it apart.
The guy at CWC said they do a lot of 400f wheels,so I assumed they would know which spokes to send me. :(
Just wanted to know if the rear hub was offset,or not. I forgot to check when taking it apart,and hope its only the spokes.
I was hoping to get my wheels re-built today. >:( >:(
cheers,  Kenny.

mickwinf:
I think all of our Hondas are central to the hub, I think even on the front wheel there should be 2 different angles for inner and outer spokes.

Drew400:
Hi Kenny,

I have just taken the attached photos that I hope will help you.

Cheers,

D.

kenny1059:
Mickwinf,  I agree that the inner spokes,front and rear should have different angles.
I will phone CWC in the morning,see what they have to say.

Drew,  Those photos are perfect. Cheers.

  Kenny.

Drew400:
You're very welcome. Truth is, I am delighted to offer some input rather than simply asking for help. It feels like a new phase in my forum learning! Glad it was useful, cheers, D.

Navigation

[0] Message Index

[#] Next page