SOHC.co.uk Forums > CB750

cb 750 wire harness

(1/2) > >>

antonypo:
Hi there.
I am going to rewire (or attempt to) my k4 when i finally start to rebuild. I have looked up the code 32100-341-703 but thought i'd ask is this ok for the uk. I have been advised by a fellow restorer that it might have the indicators on as running lights as its a u.s. bike. Can anyone tell me if this is the case originally? Here's the link
http://www.partsnmore.com/parts/honda/cb750k/?filters[fitting]=custom&filters[page]=2#product-24-4001
 

r1_pete:
It is possible, but, the running light indicators have twin filaments, so easy to omit the running lights by using UK single filament indicators.
Of more concern would be if the headlight it permanently on, some significant differences exist then.

antonypo:
thanks for the reply but not sure what you mean. my speed triple has headlight on all the time so not a problem in uk. what problems could that cause?

mick:
Hi Antony, I think Pete was trying to say that UK bikes were wired so you could switch the lights on and off and the US bikes had no choice the lights were on all the time  ;) cheers Mick.

JamesH:
Anthony, in terms of doing a straight swap then the harness you're looking at is a good part - i had to replace the full harness on one of my k4's last year and used one of these reproduction parts from the us. So long as you're methodical and take your time it's a plug and play job. Just take several photos now of the existing harness install / routing. Also, you may end up with a pair of spare female connectors in the headlight (from memory). I had to make up a jump lead to connect these two spares (have a search on the us forum for a thread started by HondaMan - he talks through it in great detail). Good luck...

Navigation

[0] Message Index

[#] Next page