Going to build a CR Rep, as well as the current project.

[r1_pete]

After my lack of motivation post a few weeks ago, the bug has really bitten again, and with all this talk of CR750 reps I do fancy one, but I also want to complete the existing project the way I originally intended.

So the answer is to build a CR rep as well as the current bike. I have quite a lot of cycle parts, probably enough, and engines, but, I don't have a frame.

So.

If anyone has one, or knows of a frame languishing in the back of a garage, waiting for the scrap man, on its way to the tip etc. I could be a buyer. Prefer a pre 75 K, but anything would work, cracks and breaks don't matter I can weld pretty well - w.h.y.
Cheers.
Pete

[MarkCR750]

Excellent taste Pete, can't fault you there, here's a frame, no log book though

http://www.ebay.co.uk/itm/Honda-CB750-CB-750-K7-1977-SOHC-Frame-Chassis-CB750K-2706039-/331129479914?pt=UK_Motorcycle_Parts_13&hash=item4d18dae2ea

[philward]

Hi Pete
I've got an American import frame that is a K2 (will check) but no logbook - goodish nick except it looks like its had the front down tubes 'squeezed' with a jig to take Windjammer fairing brackets (I assume).  I was going to get the dints welded up but picked up another frame from DK - but found that had rusted through (I'm keeping that for a future café racer project after K2 finished - probably)
Phil

[westfieldandy]

I have a couple of frames with log books both are late frames f1 or f2.