SOHC.co.uk Forums > CB750

engine removal hell !

<< < (2/4) > >>

Trigger:
Mine has wheel and rotates. And what do you do with that if you need to work on the sump? ;)

Bitsa (Ralph Wright - RIP):
You can lie it on its side real easy peasie Trig soooooooooo easy to move around.
Cheers
Bitsa

LesterPiglet:
I'm pleased I can manage my wee engine on my own.   ;)

Lobo:
Anthony,

Sorry to sound obvious but have you removed the top breather cover, ... sump... and oil filter?

Not done the '750 but these bits definitely need to be removed from the '400F first. And it wasn't totally obvious .... it looked like it would come out with the breather cover on... but nope.

If no 2" foam handy you can try an old sheet on the lawn when you lay the bike over.

Cheers

antonypo:
took the oil filter off but the top cover wont come off as all the screws are hard down. However the book says just taking the inspection covers off is enough.
Looks like i need an impact driver then? I also though it didn't mention taking the cover off so as not to damage the rockers etc???
The video i watched (cant find it now) had the cover on too.

Navigation

[0] Message Index

[#] Next page

[*] Previous page