SOHC.co.uk Forums > CB500/550

PA button

(1/5) > >>

Trigger:
This may seem a strange question. I have 2 CB550F's and both have a PA switch combined with the horn button but, no wires in the loom/harness to connect. So my question is does the CB550F have a PA button as standard?

Steph550:
If by PA switch you mean the passing light button, mine has it - you press the button in for the horn, and sideways to flash main beam.

Steph.

Trigger:
Cheers Steph, have the two wires coming out the switch gear but, nowhere for them to go. Can't seem to find them on any wiring diagram. 

Trigger:
Not us spec anymore. Oddjob ,would you know what the wire colours are for the PA? Have one uk F1 now and the sparky copied the loom/harness from that. Coming out of the switch we have: Blue, Brown/red, Brown/ blue, Brown/white, Gray, Light blue, Orange, Light blue/white, Orange/white and Light green. Sorry and a white. 

Bryanj:
I think the brown red is the power feed to the dip switch and connects to the RH switch which in UK is an on/off whilst on US works via the start button

Navigation

[0] Message Index

[#] Next page