SOHC.co.uk Forums > CB500/550
Triggers bucket
Norniron:
Triggers problem child
Norniron:
The two types of arm ,on the bottom is a k3 arm
Trigger:
Norniron, so which arm is the top? if the bottom is K3.
Ewan 500 K1:
so next we want to measure the length of the lower fork case ? I have three sets... mix / match of 500 and 550's and not sure which is which . (Laterz ... the one marked 341 seems to be from a 750 K3-K5 and / or 550K1 All three are idential, save for one which is about 5mm longer. (550K3 ?)This one might be a 550K3 one) .. but even in this one the distance between the pivot mount bolt holes and the bottom are identical ... so all three sets would result in same caliper to disc relationship. See attachments:
[ Guests cannot view attachments ] [ Guests cannot view attachments ]
Are we sure its not the wrong caliper arm thats on the bike ? I'm trending towards this being the problem
Norniron:
--- Quote from: trigger6969 on May 07, 2014, 10:21:06 PM ---Norniron, so which arm is the top? if the bottom is K3.
--- End quote ---
Cb500 so ive been told
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version