SOHC.co.uk Forums > CB500/550

exhaust stud coming out

(1/1)

MikeM:
fitting exhaust and came up against a small issue, one stud on no 3 exhaust is coming out when I have fully tightened bolt on, when I take the nut off it pulls stud out

how can I get the stud all the way in ?

Trigger:
Put two nuts on so one locks up against the other.Add a bit of retainer (if you have)  and wind it in.

Bryanj:
If you mean the stud is pulling out you will have to helicoil the hole

Navigation

[0] Message Index