SOHC.co.uk Forums > CB500/550

motad exhaust fitting

(1/7) > >>

MikeM:
fitting this motad until I find last part of my 4 into 4

Instructions on this don't match up with headers I have



instructions fit Q1M5H to port 1, there is no header pipe with that marking , all the pipes are marked M54-1S up to M54-4S

anyone came up against this before, thought it would be a simple job to fit these

tried fitting 1 and 3 first and then silencer but the last pipe is and inch out, no 2 cylinder the one you use the bolt to nip up the pipe with does not reach

Thanks

mike

LesterPiglet:
just fit 1s-4s left to right. The end of the pipes should all be the same length. Fit the silencer last.

MikeM:
I have tried it 2 ways fitting 1-4 headers and then the silence........  also 1 and 3 as in their instructions then silencer and then pipes 2 and 4, pipe 2 seems to come up short ? by a good inch ?

LesterPiglet:
I've seen this on the US site. Get in touch with Motad.

MikeM:
I have ... just awaiting a reply   :-\

Navigation

[0] Message Index

[#] Next page