SOHC.co.uk Forums > CB750

K2 carb throttle spindle carrier.

(1/2) > >>

r1_pete:
My carb throttle spindle carrier / mounting bracket is broken, on taking it to bits I find the 10mm shaft is running in a 13mm bore in the ally casting.

Before I go hunting for another casting, are there different sizes, or should there be a bushing in each of the casting lugs which the shaft runs in?

do these issues ever stop, I had less hassle with the E Type.....

Cheers.

Pete.

AshimotoK0:
Can you post a pic or P/N of what is broken Pete. I broke up a set of K2-K6 carbs to steal the floats/clips etc. from them for my K0.

Also have the alloy carrier for K7 carbs but that's totally different.

Cheers.... AshD

r1_pete:
Its the bit circled which has broken off on mine, I tried welding it, but the metal is like an aero chocolate bar and just will not weld neatly.

mickwinf:
Pete if that is similar to the 500/550 type there was a pin that locates the shaft via a groove in the shaft itself, it stops side to side movement, usually gets broken when the shaft is forcibly removed (don't ask how I know :-[ )

AshimotoK0:
I am pretty sure I have one of those spare Pete but may have spindles etc. still on it. It's no use to me as the 750K0 has 4 separate carb cables. I will have to venture in the garage which is chocker so give me a day to find it and I will send pic, if you are interested.

Cheers .. AshD

Navigation

[0] Message Index

[#] Next page