SOHC.co.uk Forums > CB750

speedo gear box

(1/2) > >>

billy192:
took the K6 out for a shake down and the speedo thing on the front axle tries to follow the direction of travel
i have made sure the axle is tight and you cant turn by hand but it slowly turns until the cable stops it
Help
Billy

Green1:
Hi billy if the speedo drive is trying to turn than it can't be engaged in the retainer.
Sorry I don't have any pics.

Mick

Bitsa (Ralph Wright - RIP):
Billy
Give me 5 mins will do a photo for you cheers
Bitsa

Bitsa (Ralph Wright - RIP):
Billy.
As far as I can remember there is no locater of the speedo drive but as you can see from the pics thats where you locate it do the spindle up tight and fit the clamps with the arrow facing front and it should not move.Try again mate
Cheers
Bitsa

billy192:
thanks i will try again in the morn. I definitely don't have any retainer all I took off I put back on.
Billy

Navigation

[0] Message Index

[#] Next page