SOHC.co.uk Forums > CB750

CR 750 brake plate

(1/3) > >>

theulsterman:
Hi,starting to build my CR replica, final problem is the modification required for a brake plate, I have good pictures to guide me but have not got the cam levers required to make it authentic looking, I would need the arm which has the spindle for the cam half way up it, rather than the spindle hole at one end, I require a fitment for a connecting rod at one end and a facility for a cable at the other. Any help would be appreciated.

MarkCR750:
hello Ulsterman, I decided to stay with the brake rod on mine, just inverted the set up so that it was easy to link to my rearsets, not authentic but works better than a cable and I will be using mine on the road so stopping is important!, (I can always swap to cable later if it bothers me), if you google "lordmoonpie cr750" you will find Simons site, there is not much he doesn't know about CR's and I'm sure he will be able to advise.

SteveD CB500K0:
Simon is a member here "Lordmoonpie" but hasn't been around for at least a couple of years. It's good to know that he's still active.

Maybe you could invite him back as we seem to have grown a thriving CR group recently!

Steve

gamma:
]

I've done mine slightly different with a GT750 cable

gamma:



Hope it works!

Navigation

[0] Message Index

[#] Next page