SOHC.co.uk Forums > CB500/550

replica shock absorbers

<< < (4/4)

Trigger:
Best to take them apart in a press. The damper rod will need hard chrome.

wolfheze:
I am fairly certain that the damper rod will be fine, like i said the dampers look almost new, the only thing wrong with them visually is some very light pitting on the shrouds.

Bryanj:
You have to pull the shroud down along with the spring then the retaining collet(s) will come out

wolfheze:
Ok thank you

Navigation

[0] Message Index

[*] Previous page