SOHC.co.uk Forums > CB500/550

Is this a spacer issue on 500k -5mm play on the front wheel spindle

(1/2) > >>

simonster:
I have changed the mag wheels fitted to my '71 500 k for standard spoked wheels. All fittings are present as per the manual but I have 5mm sideways play of the wheel on the front sprindle. The gap between the spacer and fork is the 5mm and can be seen clearly on the two attached pics. I'm thinking this shouldn't be any measurable movement and now wonder whether the front mag wheel may have been 5mm greater in width, unless someone can suggest another reason for this? Unfortunately I don't have the mag wheel to measure.

Trigger:
You have the spindle nut on the wrong way. Look at number 17 in the link>>>   http://www.cmsnl.com/honda-cb500-four-k0-england_model14653/partslist/F07.html#results

simonster:
Doh!!...thanks, will try again and report..

Trigger:
Simon, just turn it round. You tighten up the spindle on the wheel and then fit it to the forks.

simonster:
Trigger, if feel pretty stupid..! It was obviously the wrong way but I never saw it..thanks for pointing this out as its cured the problem.

Navigation

[0] Message Index

[#] Next page